SCT-1100 Advanced Series Signal Conditioning Weight Transmitter
Total Control in a Compact Package
The ideal solution for PLC systems which require weight data from a scale, Rice Lake’s SCT signal transmitters offer maximum control without the additional cost or space required of a traditional weight indicator.
These multi-function transmitters have a compact design while presenting the same signal-conditioning functions.
Utilized as an independent or dependent four-channel digital junction box, the SCT-1100 allows for the direct reading and diagnosis of each individual connected load cell or summed as a whole.
Features
Up to four independent scales or four load cell inputs
Quick menu for real and theoretical calibration
Red LED display (13mm) and six LEDs show active functions
Standard DIN rail-mounting with power supply and enclosures
Configurable calibration and setup parameters from keyboard
Up to three calibration linearization points or three from the keyboard
Reading of the net, gross and tare weights, clearing, semi-automatic and presettable tare, scale switch, setting of outputs application thresholds
Diagnostic information via serial port, message display, printing, setting of APW in counting mode, simulation of key pressure
Specifications
Power:
12/24 VDC
Power Consumption:
70 mA min – 100 mA max
Excitation Voltage:
5VDC, 120 mA, 8 x 350 Ω
Analog Signal Input Range:
± 39 mV
Analog Signal Sensitivity:
0.03 µV/graduation minimum
0.3 µV/graduation recommended
A/D Sample Rate:
Four channel A/D 24-bit sigma-delta conversion, up to 200 conv. /sec. auto select
Resolution:
Internal resolution: 1.5 million counts
Weight display resolution: 800,000
Digital Inputs/Outputs:
Two inputs: 12/24 VDC
Two outputs:150 mA 48 VAC/ 150 mA 60 VDC
Serial Port:
1-RS-485, 1-RS-232
Analog Output (if equipped):
Opt isolated, 16-bit
0-20mA, 4-20mA (Maximum 350 ohm)
0-5VDC, 0-10VDC (Minimum 10,000 ohm)
Display:
Six-digit (13 mm), red LED
Annunciators:
Net, center of zero, stability
Keyboard:
Five key, membrane panel, tactile feel
Zero (Down), Tare (Up), Mode (Right), Print (Enter), C (On/Off)
Temperature & Humidity:
Working temperature: 5° F to 104° F (-15° C to 40° C)
Humidity: 85% non-condensing
Dimensions (W x H x D):
4.17 in x 3.54 in x 2.28 in (106 mm x 90 mm x 58 mm)
Weight:
1 lb (0.5 kg)
Rating/Material:
NEMA Type 1 plastic pluggable connectors
Warranty:
One-year limited warranty