MSI-4260M Port-A-Weigh Crane Scale
The MSI-4260M Port-a-Weigh crane scale is the most robust scale on the market for marine and industrial weighing, able to capture weight with ± 0.1% accuracy with a standard 5,000 lb capacity.
An IP66 aluminum enclosure stands up to moisture in marine and washdown environments. Sensitive electronic components are sealed off and well-protected, including the MSI-4260M’s sleek and vibrant LCD display. Featuring programmable brightness control, the display ensures users have access to the weight data they need—in any light condition.
In highly regulated marine applications, meeting safety requirements is crucial. The NTEP-Certified MSI-4260M features a 200% Safe and 500% Ultimate Safety Factor, minimizing the risk of accidents from overloading. The MSI-4260M is built to perform reliably for every catch with extended battery life up to 1,000 hours. A brightly lit battery display indicates when the unit is at 25%, 50%, 75% and full power. Timed auto-off and auto-sleep modes conserve power when the unit is not in use, meaning users are never surprised by a dead battery.
Choose equipment that works as hard as you do with the MSI-4260M crane scale, designed with dockside weighing in mind.
Features
Standard Features
IP66 cast aluminum
Top lifting eye with lower link interface
Five-digit, 1.75 in (44.5 mm) LCD with programmable brightness control
Battery operated, six (6) D cell 1.5V alkaline batteries
Meets or exceeds OSHA, ANSI, ASME and other safety design standards (5:1 Ultimate Safety Factor)
Options
(CONTACT MSI FOR APPLICATION CONSULTATION)
Rugged remote control (control for On/Off, Zero, Tare and other functions)
RF modem install for connectivity to MSI-8000, MSI-8000HD, MSI-8004HD, TranSend and LaserLight 2 remote display
WiFi and Bluetooth® communication are available for specialty applications. (Contact MSI for application consultation)
Specifications
Accuracy:
± 0.1% +1 d of applied load
Resolution:
Max NTEP Approved Class III: 2,500 Divisions
Max NTEP Approved Class IIIL: 5,000 Divisions
Max Non NTEP Approved: 10,000 Divisions
Enclosure:
IP66 cast aluminum
Lifting Eye, Shackle & Hook:
Top lifting eye with lower link interface
Design Overload:
200% Safe / 500% Ultimate
Functions:
Power: Turns Unit ON or OFF
Zero: Zeros applied load up to 100% of capacity (limited range in NTEP configuration),
Tare: Tares applied load and displays weight in Net mode, User: Programmable as test, total, unit, peak hold, net/gross, view total and print
User: Programmable as test, total, unit, peak hold, net/gross, view total and print
Display:
Five-digit, 1.75in (44.5 mm) LCD with programmable brightness control
Displayable Units:
Pounds or kilograms selectable
Annunciators:
COZ, Battery Level, Net, Total, lb/kg, Stability, RF and Setpoint LEDs
Power:
Battery operated, six (6) D cell 1.5 V alkaline batteries
Operating Time:
Up to 1,000 hours of battery life with typical use, less with optional RF Modem
Operating Temperature:
Legal for Trade: 14°F to 104°F (-10°C to 40°C)
Operating: -20°F to 122°F (-28°C to 50°C)
Auto-Off Mode:
Powers off after the scale is not used for the set time (in minutes); 15, 30, 45, 60 or OFF selectable
Auto Sleep Mode:
Power down during non-use after the set time (in minutes) and powers up with weight change or any key press; 5, 15, 30 or OFF selectable
Service Counters:
Counts number of lifts over percentage of capacity and lifts over capacity
Calibration:
Digital (procedure initiated by calibration switch)
Filtering:
OFF, LO, HI-1 or HI-2 selectable
Radio Link:
802.15.4 at 2.4 GHz
Radio Effective Range:
Typically 100-300 ft line of sight
Warranty:
One-year limited warranty
Approvals:
NTEP COC 19-122