MSI-3460 Challenger 3 Crane Scale
A Legal for Trade Crane Scale
The MSI-3460 with ScaleCore measurement module provides industry leading weighing features of previous Challenger designs plus much more. Long range viewing is enhanced with a larger 1.5 inch (38 millimeter) ultra-bright LED digital display and resolution settings of up to 10,000 divisions for precise 0.1 percent loading accuracy. Product operating time is extended to over 80 plus hours with a single six-volt rechargeable battery. The original signature Challenger packaging has been upgraded to NEMA Type 4/IP65 levels. Manufactured in the USA in strict compliance with the highest safety standards, Challenger continues to sustain minimum 200 percent safe and 500 percent ultimate load ratings.
A ScaleCore electronics retrofit kit is available for upgrading existing MSI-3260 or MSI-3360 Challengers to new generation MSI-3460.
Features
Standard Features
Crane scale unit with five-digit, 1.5 in (38 mm) LED display
Top lifting eye and bottom swivel hook
Lb/kg switch selectable
Six volt rechargeable battery and universal 115/230 VAC, 50/60 Hz battery charger (NA plug standard)
Meets or exceeds OSHA, ANSI, ASME and other safety design standards (5:1 Ultimate Safety Factor)
NTEP Certified (250 lb-10,000 lb capacities)
Options
(CONTACT MSI FOR APPLICATION CONSULTATION)
Rugged remote control (control for Off, Zero, Tare and other functions)
RF modem install for connectivity to MSI-8000, MSI-8000HD RF, MSI-8004HD RF remote display (100 ft line of sight), TranSend and LaserLight2 remote display
Universal direct power supply (115/230 VAC)
Audible alarm
Wi-Fi and Bluetooth® communication are available for specialty applications.
Specifications
Accuracy:
± (0.1% +1 d) of applied load
Resolution:
2000 to 3750 d standard (Up to 10,000 d available)
Enclosure:
NEMA Type 4, IP65, powder coated cast aluminum
Lifting Eye & Hook:
Crosby® or equivalent with 360° non-bearing swivel hook
Design Overload:
200% Safe / 500% Ultimate
Functions:
Power: Turns unit ON or OFF Zero: Zeros applied load up to 100% of capacity (limited range in NTEP/OIML configurations) Tare: Tares applied load and displays weight in Net mode User: Programmable as TEST, UNITS, NET/GROSS, TOTAL, PEAK HOLD & SETPOINTS
Display:
5-digit, 1.5 in (38 mm) LED with programmable brightness control
Displayable Units:
Pounds or kilogram selectable
Annunciators:
COZ, Net, Gross, Total, Peak, Low Battery, lb/kg,
Motion, Setpoints, ACK IN, ACK OUT, RF
Power:
6 Volt rechargeable battery. 115/230 VAC battery charger is included
Operating Time:
Up to 80 hours between charging with typical use. Less with optional RF Model
Operating Temperature:
-40° to 104°F (-40° to 40°C)
Auto-Off Mode:
Select for 15, 30, 45, 60 minutes or Off
Auto Sleep Mode:
Power down during non-use and power up with weight change or any key press
Service Counters:
Counts number of lifts over percentage of capacity and lifts over capacity
Calibration:
Digital
Filtering:
OFF, LO, HI-1, HI-2 selectable
Warranty:
One-year limited
Approvals:
NTEP CC 86-021 (250 thru 10,000k only)